GSO President

The GCC Standardization Organization(GSO) has a presidency to run its affairs.presided by a president who will be appointed for a period of three years renewable
for only another office period.

GSO Current President

H.E. Eng. Nawaf Ibrahim Al-Mana

H.E. Eng. Nawaf Ibrahim Al-Mana

President of the Standardization Organization for the Arab Gulf Cooperation Council (GSO), starting April 28, 2024.

Qualifications:
  • Master of Management and Engineering, Sheffield Hallam University, UK, 2003.
  • Bachelor’s degree in chemical engineering, Qatar University, 1994.
Practical experience:
  • Assistant Chairman of the Qatar General Organization for Standardization (Emiri Resolution No. (58) of 2018).
  • Director of the Standards and Standardization Department (2008-2018).
  • Director of the Central Laboratories Department (2002-2008).
  • Standards Specialist in the Department of Standards, Metrology and Consumer Protection (1994-2002).
Previous Membership and Chairman of Committees:
  • Chairman of the Arab Standardization Strategy Follow-up Committee (AIDSMO).
  • Member of the Board of Directors of the Gulf Accreditation Center (GAC).
  • Chairman of the National Conformity Assessment Committee.
  • Chairman of the National Committee for Electrical and Electronic Standards.
Previous Representation of the State of Qatar:
  • Representative of the State of Qatar in the International Committee for Electrotechnical Standards (IEC).
  • Representative of the State of Qatar in the International Metrology Organization (OIML).
  • Representative of the State of Qatar in the Codex Alimentarius Commission (CAC).
  • Representing the State of Qatar in GCC Standardization Organization forums (GSO) and regional and international meetings and exhibitions concerned with standardization.
  • Representing the Qatar General Organization for Standardization (QS) in negotiations with countries and regional and international organizations.

Membership in listed companies in Qatar stock exchange:

  • Member of the Board of Directors of Widam Food Company, April 2010 to date, Chairman of the Nominations and Remuneration Committee.
  • Member of the Board of Directors of Qatar General Insurance and Reinsurance Company 2020 to date, Chairman of the Risk Committee.
  • Member of the Board of Directors of Qatar National Bank 2023 to date.
  • Member of the Board of Directors of United Development Company March 2016 to 2019, Chairman of the Company’s Audit Committee.
  • Member of the Board of Directors of Qatar Technical Inspection Company 2007-2009.

Former Secretary General’s

H.E. Dr. Rashid bin Ahmad bin Fahad

Dr. Rashid bin Ahmad bin Fahad

GSO Secretary General(2004 – 2008)

Ministry of Environment and Water(MOEW) Minister in 2008, His Excellency Dr.Rashid Ahmed Mohammed Bin Fahad was appointed as minister of UAE environment and water.He was born in 1964 in the Emirate of Dubai. In addition to his ministerial position, he has been holding the position of Chairman of Emirates Standards Authority since 2008.

Academic Qualifications:

– His Excellency Dr. Rashid obtained Ph. D. in Civil Engineering (Environment Hygiene) from the University of Strathclyde, Scotland (UK) in 2001.
– He also holds Masters Degree(Ms.Sc.) in Ecology from the UAE University – Al Ain, where he graduated in 1994.
– In addition, he holds bachelor degree(B.Sc.) in Chemical Engineering from North Eastern University, Boston – USA in , where he graduated in 1989.


His Excellency Dr.Rashid Ahmed Mohammed Bin Fahad has already held the positions below:

  • Secretary General for GCC Standardization Authority-Riyadh (KSA) from 2004 to 2008.
  • Deputy Chairman of Emirates Authority for Standardization & Metrology Cooperation(ESMA) from 2005 – 2008.
  • Deputy General Manager of Emirates Authority for Standardization & Metrology Cooperation(ESMA) from 2003 to 2004.
  • President of Food and Environment Lab – Dubai Central Lab Department – Dubai Municipality from 1997 to 2003.
  • Operations Manager – Dubai Municipality from 1989 to 1997.
  • In addition, His Excellency is also a member of Zayed International Award for Environment.
  • Board Member of American Society for Testing and Materials(ASTM International).

H.E. Dr.Anwar Yousuf Abdullah

Dr. Anwar Yousuf Abdullah

GSO Secretary General(2008 – 2012)

Currently serves as Bahrain’ s Ambassador to the People’ s Republic of China.

Academic Qualifications:

Ph.D.in Chemical Engineering– University of Bradford– United Kingdom.
M.Sc.in Chemical Engineering– University of Bradford– United Kingdom.
B.Sc.in Petroleum Engineering– Riyadh University– Kingdom of Saudi Arabia.

Work Experience:

  • Secretary-General of the Standardization Organization for the Cooperation Council for the Arab States of the Gulf (GSO).
  • Advisor to the Secretary General of the Cooperation Council for the Arab States of the Gulf.
  • Director of Scientific and Technical Cooperation Department(Nuclear Energy Issue)– General Secretariat of the Cooperation Council.
  • Director of Energy Department(Oil, gas, petrochemicals and metals)– Secretariat General of the Cooperation Council.
  • Assistant Professor– Faculty of Engineering– University of Bahrain.
  • Petroleum Engineer– Bahrain Petroleum Company.

H.E. Mr. Nabil Ameen Molla

Mr. Nabil Ameen Molla

GSO Secretary General(2012 – 2018)

H.E.Received a B.S.in Chemistry / Biology, from King Saud University, Riyadh / KSA in 1974 and M.A.in Chemistry, University of Denver, Colorado, USA, 1978.

His Excellency Mr.Nabil Ameen Molla has already held the positions below:

  • H.E. was the Governor of Saudi Standards, Metrology and Quality Organization (SASO) (2005-2012).
  • H.E. Led the GCC Accreditation Center(GAC) to be an internationally recognized body in (ILAC) when he was the Director General of the GCC Accreditation Center (GAC) until 20 June 2016.
  • H.E. is Member of any National and International Organizations, such as Member of ISO Council(2011 – 2012), Member of the Council of Saudi Food and Drug Authority (2005 – 2012), Member and Secretary – General of King Abdul – Aziz Quality Award(2005 – 2012), Member of Saudi Consumer Protection Association(2008 – 2012), Member of the American Society for Quality(ASQ) (2008-2011) and Member of the Board of ASTM International (2014-2016).
  • H.E. Represented the Kingdom of Saudi Arabia in many meetings of Regional and International Standardization Organizations(GSO, AIDMO, ISO, IEC, OIML, BIPM, ILAC, IAF).

H.E. Mr.Saud Al – Khusaibi

سعود بن ناصر الخصيبي

GSO Secretary General (2018 to 27 April 2024)
Academic Qualifications:

2004: Master of Economics– University of Hull, United Kingdom.
1998: Bachelor of Economics, Cardiff University, UK.
1984: Diploma in Business Administration – University of Bradford, UK.
2015: Certificate in E – Learning of the World Trade Organization.In an introduction to the World Trade Organization with an excellence degree.
2016: E – Learning Certificate of the World Trade Organization in the Treatment of Harmful Practices in International Trading.
2016: Certificate in E – Learning for the World Trade Organization Technical Barriers to Trade with distinction.

Practical Experiences:

November 2014– April 2018: The General Directorate of Organizations and Commercial Relations – Ministry of Commerce and Industry, Sultanate of Oman.

  • Directing, guiding and monitoring policies and decision-making at the executive level of the activities of the General Directorate of Organizations and Commercial Relations, which include supporting and strengthening trade relations with different countries of the world.
  • Activate the role of joint committees and regional and international organizations and supervise the Sultanate of Oman ‘s office at the World Trade Organization in Geneva.
  • 2014 – 2007: Director General of the General Directorate of Standardization and Metrology – Ministry of Commerce and Industry, Sultanate of Oman.
  • 1996 – 2007: Director of the Department of Industrial Planning and Studies – Directorate General of Industry, Ministry of Commerce and Industry, Sultanate of Oman.
  • 1990 – 1996: Director of the Center for Industrial Statistics – General Directorate of Industry, Ministry of Commerce and Industry, Sultanate of Oman.
  • 1988 – 1990: Statistical – Directorate General of Industry, Ministry of Commerce and Industry, Sultanate of Oman.
  • 2014 – 2011: Member of the Board of Directors of the Public Authority for Consumer Protection.
  • 1998 – 2003: Member of the Board of Directors of Oman Oil Refinery representing the government share.
  • 1998– 2003: Member of the Board of Directors of Oman Chromite Company representing the government share.
  • 2004 – 2009: Member of the Board of Directors of Oman Mining Company representing the government share.

Other (training courses, conferences and meetings):

  • Attending local and regional meetings and conferences: Codex Alimentarius Commission (CODEX), GCC Standardization Organization (GSO), International Standardization Organization (ISO), International Electrotechnical Commission (IEC), etc.
  • Courses in computer and information technology.
  • Leadership courses and team building.
  • Negotiation and contracting skills.
  • Statistical Analysis.
  • Participation in working papers on standards and metrology in local, regional and international conferences and seminars.
  • Attending the 10 th Ministerial Conference of the World Trade Organization(Nairobi, 15 – 18 December 2015).
  • Attend a workshop on the scheduling of the World Trade Organization of the work of the post – Nairobi and its impact on the Arab States(Amman, 22 – 24 February 2016) Organized by the Islamic Development Bank and the Organization of ESCWA.
  • Attending the “Trade and Development of the Arab States” workshop(Abu Dhabi, 19 – 21 April 2016) organized by the World Trade Organization and the Arab Monetary Fund.
  • Attending a Workshop Protecting Gulf Industries from Harmful Practices in International Trade(Dumping / Support / Prevention)(Muscat, 19 – 22 October 2015).Organized by the Technical Secretariat of the Standing Committee for Combating Harmful Practices in International Trade and the Oman Chamber of Commerce and Industry.

GSO e-Services

Standards Store

Buy Gulf Standards and Technical Regulations, pay online and download in PDF.

G-Mark

Products bearing the G-Mark registered by Gulf Notified Bodies.

Mutabiq

Conformity Certificates and Fuel Efficiency Labels for Motor Vehicles, Motorcycles and Tyres.

Training Programs

Specialized training courses in standardization activities delivered by world class trainers.

Gulf Committees

Gulf Committees, Membership, Messages, Documents...

Energy Efficiency Rating

Energy Efficiency Rating Labels for Air Conditioners in Bahrain & Oman.

X

 

We had welcome your feedback!

Thank you so much for visiting our website. Help us to improve your experience by taking our short survey.

By clicking Yes, you will be redirected to the survey page.

 
Yes   No, Thanks