GSO EN 13063-3:2011
Gulf Standard
Current Edition
·
Approved on
12 October 2011
·
Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys
GSO EN 13063-3:2011 Files
No files are available for this standard right now!
You can buy this standard from any member store
GSO EN 13063-3:2011 Scope
This product standard specifies the requirements and test methods for dry (designated D) and/or wet (designated W) air flue system chimneys, including terminals in which the products of combustion are conveyed to the atmosphere through clay/ceramic flue liners and combustion air is conveyed to suitable room-sealed appliances through an air duct or an air gap. It also specifies the requirements for marking, manufacturer's instructions, product information and evaluation of conformity. This standard does not apply to structurally independent (free standing or self supporting) system chimneys. An air flue system chimney is made of the following components where appropriate: - clay/ceramic flue liners; - insulation layer; - outer walls; - mortar for jointing flue liners; - acid resistant mortar or elastomeric sealant for jointing flue liners; - mortar for jointing outer walls; - terminal; - chimney base; - pressure equalising opening; - air duct; - air gap; - cladding; - opening section; - cleaning and inspection door; - distance piece; - reinforcement. The air- flue system chimney covers a combination of compatible chimney components obtained or specified from one manufacturing source, with product responsibility for the whole chimney.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 440:2007
Gulf Standard
Calcium Silicate bricks
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Construction and Building Sector
GSO ASTM C1074:2024
ASTM C1074:19e1
Gulf Standard
Standard Practice for Estimating Concrete Strength by the Maturity Method
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO ISO 12543-2:2024
ISO 12543-2:2021
Gulf Standard
Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO EN 1097-3:2024
EN 1097-3:1998
Gulf Standard
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO ASTM C926:2024
ASTM C926:23a
Gulf Standard
Standard Specification for Application of Portland Cement-Based Plaster
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)