GSO ASTM E1991:2011
Gulf Standard
Current Edition
·
Approved on
12 October 2011
·
Standard Guide for Environmental Life Cycle Assessment (LCA) of Building Materials/Products
GSO ASTM E1991:2011 Files
English
9 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ASTM E1991:2011 Scope
1.1 This guide covers a common framework and set of
principles for potential users, such as product manufacturers,
environmental analysts, consultants, architects, and the building
industry in general. It describes a framework for life cycle
inventory analysis, and describes various options and aspects
of Impact Assessment and Interpretation.
1.2 The complexity and level of detail of an LCA will vary
greatly depending on the material/product or system studied,
the purpose and use of the study, the intended users of the
study, and the resources committed to complete the study. The
level of detail can range from generic to material/product
specific.
1.3 This guide does not describe in detail the actual techniques
for performing a LCA.
1.4 LCA is an emerging methodology, which is still evolving.
This guide will present its concepts and major features. It
should enable the user to better understand LCA and its
application to building materials/products, and help to identify
sources of additional information and guidance. LCA is only
one of many tools designed to aid in environmental evaluation
and decision making.
1.5 The component phases of LCA, including goal definition
and scoping, inventory, impact assessment, interpretation,
and the various methodologies used in these phases are in
various stages of development. Consequently, the results of an
LCA must be understood in the context of their completeness
and accuracy and must be applied appropriately. LCA does not
necessarily proceed as a linear process through these phases
but is conducted in an iterative fashion.
1.6 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appropriate
safety and health practices and determine the applicability
of regulatory limitations prior to use.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 440:2007
Gulf Standard
Calcium Silicate bricks
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Construction and Building Sector
GSO ASTM C1074:2024
ASTM C1074:19e1
Gulf Standard
Standard Practice for Estimating Concrete Strength by the Maturity Method
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO ISO 12543-2:2024
ISO 12543-2:2021
Gulf Standard
Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO EN 1097-3:2024
EN 1097-3:1998
Gulf Standard
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO ASTM C926:2024
ASTM C926:23a
Gulf Standard
Standard Specification for Application of Portland Cement-Based Plaster
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)