GSO ISO 10295-2:2013
Gulf Standard
Current Edition
·
Approved on
01 April 2013
·
Fire tests for building elements and components -- Fire testing of service installations -- Part 2: Linear joint (gap) seals
GSO ISO 10295-2:2013 Files
English
24 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO 10295-2:2013 Scope
This part of ISO 10295 specifies the heating conditions, methods of test and criteria for the evaluation of the
ability of a linear joint seal to maintain the fire integrity and thermal insulation of a fire-separating element at
the joint being sealed. The purpose of the tests is to assess the integrity and insulation performance of the
linear joint seals, including the effects of induced movement in those cases where the joint is designed to
accommodate movement and has a width greater than 20 mm.
It is not the intention of this part of ISO 10295 to provide quantitative information on the rate of leakage of
smoke and/or gases, or on the transmission or generation of fumes, although such phenomena can be
recorded in describing the general behaviour of specimens during the test. It is not the intention of this part of
ISO 10295 to evaluate joint seals where special test procedures already exist, e.g. doors, partitions,
penetrations, pipes, ducts and cables.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1780:2010
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Mechanical Sector
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO ISO 21384-2:2024
ISO 21384-2:2021
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO ISO 22407:2024
ISO 22407:2021
Gulf Standard
Metallic materials — Fatigue testing — Axial plane bending method
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO ISO 24513:2024
ISO 24513:2019
Gulf Standard
Service activities relating to drinking water supply, wastewater and stormwater systems — Vocabulary
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)