GSO ISO 8528-10:2013

ISO 8528-10:1998
Gulf Standard   Current Edition · Approved on 01 April 2013

Reciprocating internal combustion engine driven alternating current generating sets -- Part 10: Measurement of airborne noise by the enveloping surface method

GSO ISO 8528-10:2013 Files

English 17 Pages
Current Edition Reference Language

GSO ISO 8528-10:2013 Scope

This part of ISO 8528 defines measurement methods for the determination of airborne noise emitted by reciprocating internal combustion engine driven generating sets in such a way that the total of relevant noise emissions, e.g. exhaust and cooling system noise, together with all other sources of engine noise, are evaluated on a similar basis to yield comparable results. However, when the exhaust and cooling systems are ducted to a remote site their noise contribution is not to be included in this part of ISO 8528. The essential noise emission characteristic value is the sound power level. The results of measurement taken in accordance with this part of ISO 8528 are classified as either accuracy grade 2 or grade 3 depending on which acoustic measurement conditions are complied with. Accuracy grade 2 (i. e., engineering method in accordance with ISO 3744) requires the measuring area to be a substantially acoustic-free field over a reflecting plane (with an environmental correction K2A < 2 dB) and with negligible background noise level (background noise correction K1A < 1,3 dB). Accuracy grade 3 (i. e. survey method in accordance with ISO 3746) requires the environmental correction K2A to be less or equal than 7 dB, and the background noise correction K1A to be less or equal than 3 dB. For the operation of a generating set under steady conditions this part of ISO 8528 allows for the calculation of the A-weighted sound power level as well as appropriate octave or one third octave sound power level for the appropriate accuracy grade. This part of ISO 8528 applies to RIC engine driven AC generating sets for fixed and mobile applications with rigid or flexible mountings. It is applicable for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives.

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
GSO 98:1988
 
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF INTERIOR MATERIALS AND THEIR TESTING METHODS
GSO 2698:2022
 
Gulf Standard
Technical Requirements for Electric Vehicles

Recently Published from Mechanical Sector

GSO ISO 10425:2024
ISO 10425:2023 
Gulf Standard
Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance
GSO EN 14384:2024
EN 14384:2005 
Gulf Standard
Pillar fire hydrants
GSO BS 476-20:2024
BS 476-20:1987 
Gulf Standard
Fire tests on building materials and structures - Part 20: Method for determination of the fire resistance of elements of construction (general principles)
GSO ISO 24120-2:2024
ISO 24120-2:2023 
Gulf Standard
Agricultural irrigation equipment — Guideline on the implementation of pressurized irrigation systems — Part 2: Drip irrigation