GSO ISO 8178-3:2013
Gulf Standard
Current Edition
·
Approved on
01 April 2013
·
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
GSO ISO 8178-3:2013 Files
English
6 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO 8178-3:2013 Scope
This part of IS0 8178 specifies two methods for the
measurement of exhaust gas smoke characteristics
of reciprocating internal combustion (RIG) engines
operating under steady-state conditions. One method
evaluates smoke opacity by measurement of the
obscuration of a light beam; the other evaluates the
soot content by measurement of the blackening of a
filter. Where necessary, individual requirements may
be specified for particular engine applications.
This part of IS0 8178 does not deal with measurement
under transient conditions; if smokemeters are
used under transient conditions, the results from different
types of instrument cannot be compared unless
the sampling conditions are identical and the
instrument characteristics are compatible.
This part of IS0 8178 is applicable to RIC engines for
land, rail-traction and marine use, including engines
used to propel agricultural tractors and road vehicles.
It may be applied to engines used to propel roadconstruction
and earth-moving machines, industrial
trucks, and for other applications where no suitable
International Standards for exhaust gas smoke
measurement of these engines exist.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1780:2010
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Mechanical Sector
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO ISO 24513:2024
ISO 24513:2019
Gulf Standard
Service activities relating to drinking water supply, wastewater and stormwater systems — Vocabulary
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO EN 14622:2024
EN 14622:2005
Gulf Standard
Devices to prevent pollution by backflow of potable water - Air gap with circular overflow (restricted) - Family A, type F
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO ISO 21384-2:2024
ISO 21384-2:2021
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)