GSO ASTM A182/A182M:2014
Gulf Standard
Current Edition
·
Approved on
02 April 2014
·
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
GSO ASTM A182/A182M:2014 Files
English
17 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ASTM A182/A182M:2014 Scope
1.1 This specification2 covers forged low alloy and stainless
steel piping components for use in pressure systems. Included
are flanges, fittings, valves, and similar parts to specified
dimensions or to dimensional standards, such as the ASME
specifications that are referenced in Section 2.
1.2 For bars and products machined directly from bar (other
than those directly addressed by this specification; see 6.4),
refer to Specifications A479/A479M and A739 for the similar
grades available in those specifications. Products made to this
specification are limited to a maximum weight of 10 000 lb
[4540 kg]. For larger products and products for other applications,
refer to Specifications A336/A336M and A965/A965M
for the similar ferritic and austenitic grades, respectively,
available in those specifications.
1.3 Several grades of low alloy steels and ferritic, martensitic,
austenitic, and ferritic-austenitic stainless steels are included
in this specification. Selection will depend upon design
and service requirements. Several of the ferritic/austenitic
(duplex) grades are also found in Specification A1049/
A1049M.
1.4 Supplementary requirements are provided for use when
additional testing or inspection is desired. These shall apply
only when specified individually by the purchaser in the order.
1.5 This specification is expressed in both inch-pound units
and in SI units. However, unless the order specifies the
applicable “M” specification designation (SI units), the material
shall be furnished to inch-pound units.
1.6 The values stated in either SI units or inch-pound units
are to be regarded separately as the standard. Within the text,
the SI units are shown in brackets. The values stated in each
system may not be exact equivalents; therefore, each system
shall be used independently of the other. Combining values
from the two systems may result in non-conformance with the
standard.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2489:2015
Gulf Standard
Specifications of Recycled Aggregates from Construction
Waste to be used in construction Works
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Construction and Building Sector
GSO ASTM C1074:2024
ASTM C1074:19e1
Gulf Standard
Standard Practice for Estimating Concrete Strength by the Maturity Method
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO ISO 12543-2:2024
ISO 12543-2:2021
Gulf Standard
Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO EN 1097-3:2024
EN 1097-3:1998
Gulf Standard
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO ASTM C926:2024
ASTM C926:23a
Gulf Standard
Standard Specification for Application of Portland Cement-Based Plaster
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)