GSO ISO/TS 22269:2013
Gulf Standard
Current Edition
·
Approved on
31 December 2013
·
Reaction to fire tests -- Fire growth -- Full-scale test for stairs and stair coverings
GSO ISO/TS 22269:2013 Files
English
15 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO/TS 22269:2013 Scope
This test method describes a full-scale reference scenario procedure for assessing the burning behaviour of stairs or stair coverings, when exposed to a defined ignition source. The risks addressed in this scenario are essentially those of a deliberate rather than an accidental fire. The ignition sources specified include a wood crib to represent a local attack with burning crumpled newspaper and a gas burner to represent a more severe attack when the whole width of the bottom step is attacked.
The observations of burning behaviour provide a basis for assessing the fire exposure behaviour of stair coverings installed over different stair substrates.
This method is applicable to all types of stair coverings that can be installed on stairs or to the stairs themselves. The results obtained from this method reflect the performance of the total stair covering system together with the stair substrate, as tested, and are not intended to be the sole criterion for assessing the potential fire hazard of the product in use. Modifications to the stair covering, underlay, fixing system, stair substrate or other changes to the system can affect test results.
Tests are performed with an enclosed or open-sided staircase. In this test method, there is no closure at the top of the stairs to represent a ceiling on a stairs landing. The top of the stairs assembly is open so that the tests are conducted under well-ventilated conditions.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1780:2010
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Mechanical Sector
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO ISO 21384-2:2024
ISO 21384-2:2021
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO ISO 22407:2024
ISO 22407:2021
Gulf Standard
Metallic materials — Fatigue testing — Axial plane bending method
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO BS 1212-2:2024
BS 12122:1990
Gulf Standard
Float operated valves - Part 2: Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)