GSO ISO/TS 17892-10:2013
Gulf Standard
Current Edition
·
Approved on
31 December 2013
·
Geotechnical investigation and testing -- Laboratory testing of soil -- Part 10: Direct shear tests
GSO ISO/TS 17892-10:2013 Files
English
12 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO/TS 17892-10:2013 Scope
This document specifies laboratory test methods to establish the effective shear strength parameter for soils within the scope of the geotechnical investigations according to prEN 1997-1 and -2.
The test method consists of placing the test specimen in the direct shear device, applying a pre-determined normal stress, providing for draining (and wetting if required) of the test specimen, or both, consolidating the specimen under normal stress, unlocking the frames that hold the specimen, and displacing one frame horizontally with respect to the other at a constant rate of shear-deformation and measuring the shearing force, and horizontal displacements as the specimen is sheared. Shearing is applied slowly enough to allow excess pore pressures to dissipate by drainage so that effective stresses are equal to total stresses.
Direct shear tests are used in earthworks and foundation engineering for the determination of the effective shear strength of soils.
Best Sellers From Chemical and Textile Sector
GSO 575:2016
Gulf Standard
Facial tissue - paper
GSO 1046:2021
Gulf Standard
Cosmetic Products - Perfumery Products based on Ethanol
GSO 2640:2021
Gulf Standard
Cosmetic Products - General Requirements of Soaps
GSO 2055-4:2021
Gulf Standard
Halal Products- Part 4: Requirements for Halal Cosmetics and Personal care
Recently Published from Chemical and Textile Sector
GSO 2528:2024
Gulf Technical Regulation
Cosmetic products – Technical Regulation of Cosmetic and Personal Care Products Claims
GSO 1943:2024
Gulf Technical Regulation
Cosmetic Products – Safety Requirements of Cosmetics and Personal Care Products
GSO ISO 12625-4:2024
ISO 12625-4:2022
Gulf Standard
Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
GSO ISO/TR 23383:2024
ISO/TR 23383:2020
Gulf Standard
Textiles and textile products — Smart (Intelligent) textiles— Definitions, categorisation, applications and standardization needs