GSO ISO 10051:2014
Gulf Standard
Current Edition
·
Approved on
25 December 2014
·
Thermal insulation -- Moisture effects on heat transfer -- Determination of thermal transmissivity of a moist material
GSO ISO 10051:2014 Files
English
19 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO 10051:2014 Scope
This International Standard specifies a method to determine the thermal transmissivity of a moist material (λ*) under steady-state moisture conditions, i.e. not affected by moisture movement. It is measured using standardized guarded hot plate and heat flow meter methods, at temperatures above 0 °C. This material property is a function of the moisture content and does not represent the thermal performance of a material under service conditions. However, it can be used, together with knowledge of the moisture conditions in the material, to predict the practical thermal performance.
The use of λ*, the distribution of moisture under service conditions and consequently the prediction of thermal performance under service conditions are outside the scope of this International Standard. However, the moisture distribution under service conditions should, where possible, be considered when λ* is determined. Furthermore, transient methods of measurement are not included due to the difficulty involved in analysing and interpreting the results of these methods.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
GSO 440:2007
Gulf Standard
Calcium Silicate bricks
Recently Published from Construction and Building Sector
GSO EN 196-3:2024
EN 196-3:2016
Gulf Standard
Methods of testing cement - Part 3: Determination of setting times and soundness
GSO ISO 52120-1:2024
ISO 52120-1:2021
Gulf Standard
Energy performance of buildings — Contribution of building automation, controls and building management — Part 1: General framework and procedures
GSO EN 1097-7:2024
EN 1097-7:2022
Gulf Standard
Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
GSO ASTM C114:2024
ASTM C114:23
Gulf Standard
Standard Test Methods for Chemical Analysis of Hydraulic Cement