GSO ISO 4184:2015
Gulf Standard
Current Edition
·
Approved on
03 September 2015
·
Belt drives -- Classical and narrow V-belts -- Lengths in datum system
GSO ISO 4184:2015 Files
English
5 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO 4184:2015 Scope
This International Standard specifies, for classical and narrow V-belts of sections
Y (for groove profile with datum width 5,3 mm),
Ζ (for groove profile with datum width 8,5 mm),
A (for groove profile with datum width 11 mm),
В (for groove profile with datum width 14 mm),
С (for groove profile with datum width 19 mm),
D (for groove profile with datum width 27 mm),
Ε (for groove profile with datum width 32 mm),
SPZ (for groove profile with datum width 8,5 mm),
SPA (for groove profile with datum width 11 mm),
SPB (for groove profile with datum width 14 mm),
SPC (for groove profile with datum width 19 mm):
— the recommended datum lengths;
— the tolerances for datum lengths;
— the centre distance variations;
— the conditions for measuring the datum length and the centre distance variation.
The V-belts of sections Y, Z, А, В, C, D, Ε are called classical V-belts and those of sections SPZ, SPA, SPB and SPC are called narrow V-belts.
It is important that narrow belts are not used with pulleys uniquely designed for classical belts.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1780:2010
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Mechanical Sector
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO ISO 24513:2024
ISO 24513:2019
Gulf Standard
Service activities relating to drinking water supply, wastewater and stormwater systems — Vocabulary
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO EN 14622:2024
EN 14622:2005
Gulf Standard
Devices to prevent pollution by backflow of potable water - Air gap with circular overflow (restricted) - Family A, type F
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO ISO 21384-2:2024
ISO 21384-2:2021
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)