GSO ISO/TR 10771-2:2015
Gulf Standard
Current Edition
·
Approved on
03 September 2015
·
Hydraulic fluid power -- Fatigue pressure testing of metal pressure-containing envelopes -- Part 2: Rating methods
GSO ISO/TR 10771-2:2015 Files
English
40 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO/TR 10771-2:2015 Scope
This part of ISO 10771 specifies a test method for fatigue rating of the pressure-containing envelopes of components used in hydraulic fluid power systems, as tested under steady internal cyclic pressure loads in accordance with ISO 10771-1.
This part of ISO 10771 is only applicable to components whose failure mode is the fatigue of any element in the pressure-containing envelope, and that:
— are manufactured from metals;
— are operated at temperatures that exclude creep and low-temperature embrittlement;
— are only subjected to pressure-induced stresses;
— are not subjected to loss of strength due to corrosion or other chemical action;
— can include gaskets, seals and other non-metallic components; however, these are not considered part of the pressure-containing envelope being tested (see note 3 of 5.5 of ISO 10771-1:2002).
This part of ISO 10771 does not apply to piping as defined in ISO 4413 (i.e. connectors, hose, tubing, pipe).
NOTE See ISO 19879, ISO 6803 and ISO 6605 for methods of fatigue testing of tube connectors, hoses and hose assemblies.
This part of ISO 10771 establishes a general rating method that can be applied to many hydraulic fluid power components. In addition, EN 14359 has been developed for accumulators.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1780:2010
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Mechanical Sector
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO ISO 21384-2:2024
ISO 21384-2:2021
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO ISO 22407:2024
ISO 22407:2021
Gulf Standard
Metallic materials — Fatigue testing — Axial plane bending method
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO ISO 9093:2024
ISO 9093:2020
Gulf Standard
Small craft — Seacocks and through-hull fittings
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)