GSO ISO 10825:2015
Gulf Standard
Current Edition
·
Approved on
03 September 2015
·
Gears -- Wear and damage to gear teeth -- Terminology
GSO ISO 10825:2015 Files
English
61 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO 10825:2015 Scope
This International Standard defines terms used to describe the appearance of the visible surfaces of tooth flanks or the damage that can be observed on gears.
For each term, a clear concise description of the relevant gear-tooth surface is given, including mention of the significant features to be observed, which can facilitate identification of the type of condition indicated.
Each description of appearance constitutes a classification of a type of condition of a gear tooth or geartooth damage. Each description is accompanied by one or more illustrations to show differences which can exist with different gear tooth geometries. Comments are given with each illustration to facilitate the interpretation.
This International Standard specifies only the terminology which is intended to help the recognition and reporting of the appearance and condition of gears after a period of operation. Neither causes nor preventive measures for any condition described are discussed.
NOTE The English and corresponding French texts appear in adjacent columns to enable this International Standard to be used as a bilingual glossary for the appearance of gear teeth.
This International Standard is arranged so that on the same page there are:
• — a definition of the appearance of the gear tooth with corresponding explanations, and
• — an illustration of a typical example of each with associated comments.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1780:2010
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Mechanical Sector
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO ISO 21384-2:2024
ISO 21384-2:2021
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO ISO 22407:2024
ISO 22407:2021
Gulf Standard
Metallic materials — Fatigue testing — Axial plane bending method
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO ISO 24513:2024
ISO 24513:2019
Gulf Standard
Service activities relating to drinking water supply, wastewater and stormwater systems — Vocabulary
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)