GSO ISO 8323:2016
Gulf Standard
Current Edition
·
Approved on
22 December 2016
·
Freight containers -- Air/surface (intermodal) general purpose containers -- Specification and tests
GSO ISO 8323:2016 Files
English
40 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO 8323:2016 Scope
1.1 This International Standard sets out the basic requirements for the specification and testing of air/surface (intermodal) containers for general cargo, which are suitable for international exchange and for conveyance by road, rail and sea as well as by freighter versions of high capacity fixed-wing aircraft, including interchange between these modes of transport.
1.2 The coding, identification and marking of these containers shall be in accordance with ISO 6346. To denote the container as an air/surface (intermodal) container, the symbol illustrated in figure 1 shall be located at the top left-hand corner of the end walls and side walls and, as appropriate, on the roof, complying with the requirements of ISO 6346 (see annex B.3 of this International Standard).
NOTE - If any other markings are used on the container, they shall in no way interfere with the location of the marks required by ISO 6346.
1.3 The container types covered by this International Standard are :
Type Marking code identification
Air/surface intermodal (general cargo) 90 to 99 : Fixed wing
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
GSO 1780:2010
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements
Recently Published from Mechanical Sector
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
GSO ISO 21384-2:2024
ISO 21384-2:2021
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
GSO ISO 22407:2024
ISO 22407:2021
Gulf Standard
Metallic materials — Fatigue testing — Axial plane bending method
GSO ISO 24513:2024
ISO 24513:2019
Gulf Standard
Service activities relating to drinking water supply, wastewater and stormwater systems — Vocabulary