GSO ISO 4954:2017
Gulf Standard
Current Edition
·
Approved on
03 October 2017
·
Steels for cold heading and cold extruding
GSO ISO 4954:2017 Files
English
38 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO 4954:2017 Scope
1.1.1 This International Standard applies to
wrought unalloyed and alloyed steels which are intended
for cold heading or cold extruding and are
delivered as wire rods, wire or bars. It contains five
sections covering the following topics:
Section 1 - general requirements common to all
sections.
Section 2 - steels not intended for heat treatment,
with diameters from 2 mm to 100 mm.
Section 3 - case-hardening steels with diameters
from 2 mm to 100 mm.
Section 4 - steels for quenching and tempering including
boron treated steels, with diameters
from 2 mm to 100 mm.
Section 5 - stainless steels with diameters of
2 mm up to 25 mm for ferritic, up to
100 mm for martensitic, and up to
50 mm for austenitic steels.
1.1.2 This International Standard (except
section 2) is not applicable to the properties of
cold-headed or cold-extruded parts which have not
been subjected to a subsequent heat treatment. As
the properties of the parts in the cold headed or cold
extruded and subsequently not-heat-treated condition
are largely dependent on the applied coldheading
or cold-extruding conditions, these should,
if necessary, be a matter of agreement between the
purchaser and the manufacturer of the parts.
1.1.3 In addition to this International Standard, the
general technical delivery requirements of IS0 404
are applicable.
ISO/TR 9769:1991, Steel and iron - Review of avail- -
able methods of analysis.
IS0 10474:1991, Steel and steel products - Inspection
documents.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2489:2015
Gulf Standard
Specifications of Recycled Aggregates from Construction
Waste to be used in construction Works
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Construction and Building Sector
GSO ASTM C880/C880M:2024
ASTM C880/C880M:23
Gulf Standard
Standard Test Method for Flexural Strength of Dimension Stone
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO ASTM E2129:2024
ASTM E2129:18
Gulf Standard
Standard Practice for Data Collection for Sustainability Assessment of Building Products
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO EN 196-3:2024
EN 196-3:2016
Gulf Standard
Methods of testing cement - Part 3: Determination of setting times and soundness
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO ISO 10563:2024
ISO 10563:2023
Gulf Standard
Building and civil engineering sealants — Determination of change in mass and volume
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)