GSO ISO 3386-2:2017
Gulf Standard
Current Edition
·
Approved on
03 October 2017
·
Flexible cellular polymeric materials -- Determination of stress-strain characteristics in compression -- Part 2: High-density materials
GSO ISO 3386-2:2017 Files
English
5 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO 3386-2:2017 Scope
This part of ISO 3386 specifies a method for the determination of the compression stress-strain characteristics of flexible cellular polymeric materials of density greater than 250 kg/m^(3)
The compression stress-strain characteristic is a measure of the load-bearing properties of the material, though not necessarily of its capacity to sustain a long-term load.
The compression stress-strain characteristic differs from the indentation hardness characteristics (as determined in accordance with ISO 2439) which are known to be influenced by the thickness and the tensile properties of the flexible cellular material under test, the shape of the compression piate, and the shape and size of the test piece.
ISO 3386-1 specifies a method for low-density flexible materials, and differs from Part 2 in the following ways:
- Part 1 is concerned with materials of density up to 250 kg/m^(3), whilst Part 2 is mainly concerned with materials of density above 250 kg/m^(3);
- compression stress values have been deleted from Part 2;
- Part 2 does not allow the use of a cylindrical test piece.
This part of ISO 3386 is a general method for testing denser flexible cellular materials (i.e. expanded cellular rubbers), measurements being made on one of more points on the steeply rising part of the stress-strain curve. The shape factor of the test piece is important and comparative test results can only be obtained on test pieces having the same shape factor.
NOTE 1 For comparison purposes, the method may be used for material of 150 kg/m^(3) density or greater.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
GSO 2489:2015
Gulf Standard
Specifications of Recycled Aggregates from Construction
Waste to be used in construction Works
Recently Published from Construction and Building Sector
GSO ASTM C880/C880M:2024
ASTM C880/C880M:23
Gulf Standard
Standard Test Method for Flexural Strength of Dimension Stone
GSO ASTM E2129:2024
ASTM E2129:18
Gulf Standard
Standard Practice for Data Collection for Sustainability Assessment of Building Products
GSO EN 196-3:2024
EN 196-3:2016
Gulf Standard
Methods of testing cement - Part 3: Determination of setting times and soundness
GSO ISO 10563:2024
ISO 10563:2023
Gulf Standard
Building and civil engineering sealants — Determination of change in mass and volume