GSO IEC 62343-4-1:2021

IEC 62343-4-1:2016
Gulf Standard   Current Edition · Approved on 01 July 2021

Dynamic modules - Part 4-1: Software and hardware interface - 1 x 9 wavelength selective switch

GSO IEC 62343-4-1:2021 Files

English 30 Pages
Current Edition Reference Language

GSO IEC 62343-4-1:2021 Scope

IEC 62343-4-1:2016 describes and provides specifications for a software and hardware interface for the 1 x 9 wavelength selective switch. These switches can be controlled by resident firmware with this interface. This standard addresses the configuration and function to control a WSS. This interface is intended to enable a user or host to retrieve the switch status and/or adjust relevant switch and attenuation settings.

Best Sellers From Electrical Sector

GSO 2530:2016
 
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
 
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
GSO 35:2007
 
Gulf Standard
Methods of test for lead-acid starter batteries used for motor vehicles and internal combustion engines
GSO 2693:2022
 
Gulf Standard
The GCC Terrestrial Radio Receiver Specifications for AM/FM/T-DAB+

Recently Published from Electrical Sector

GSO 2770:2024
 
Gulf Standard
WATER HEATERS - ENERGY PERFORMANCE REQUIREMENTS
GSO IEC 60034-3:2024
IEC 60034-3:2020 
Gulf Standard
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators
GSO IEC 61400-26-1:2024
IEC 61400-26-1:2019 
Gulf Standard
Wind energy generation systems - Part 26-1: Availability for wind energy generation systems
GSO IEC 61300-2-38:2024
IEC 61300-2-38:2023 
Gulf Standard
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for fibre optic sealed closures and hardened connectors using air pressure