GSO ISO 17096:2021

ISO 17096:2015
Gulf Standard   Current Edition · Approved on 01 July 2021

Cranes — Safety — Load lifting attachments

GSO ISO 17096:2021 Files

GSO ISO 17096:2021 Scope

ISO 17096:2015 specifies safety requirements for the following non-fixed load lifting attachments for cranes, hoists, and manually controlled load manipulating devices as defined in Clause 3:

- plate clamps;

- vacuum lifters;

- self priming,

- non-self-priming (pump, venturi, turbine);

- electric lifting magnets (battery-fed and main-fed);

- permanent lifting magnets;

- electro-permanent lifting magnets;

- lifting beams/spreader beams;

- C-hooks;

- lifting forks;

- clamps.

ISO 17096:2015 does not specify the additional requirements for the following:

a) load lifting attachments in direct contact with foodstuffs or pharmaceuticals requiring a high level of cleanliness for hygiene reasons;

b) hazards resulting from handling hazardous materials (e.g. explosives, hot molten masses, radiating materials);

c) hazards caused by operation in an explosive atmosphere;

d) hazards caused by noise;

e) electrical hazards;

f) hazards due to hydraulic and pneumatic components.

ISO 17096:2015 does not cover attachments intended to lift people.

ISO 17096:2015 does not cover slings, ladles, expanding mandrels, buckets, grabs or grab buckets, and container spreaders.

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
GSO 98:1988
 
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF INTERIOR MATERIALS AND THEIR TESTING METHODS
GSO 2698:2022
 
Gulf Standard
Technical Requirements for Electric Vehicles

Recently Published from Mechanical Sector

GSO ISO 19438:2025
ISO 19438:2023 
Gulf Standard
Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity
GSO ISO/TR 5262:2025
ISO/TR 5262:2023 
Gulf Standard
Motorcycles — Guideline for verification of total running resistance force during mode running on a chassis dynamometer
GSO ISO/TS 22133:2025
ISO/TS 22133:2023 
Gulf Standard
Road vehicles — Test object monitoring and control for active safety and automated/autonomous vehicle testing — Functional requirements, specifications and communication protocol
GSO ISO 23117-1:2025
ISO 23117-1:2023 
Gulf Standard
Agricultural and forestry machinery — Unmanned aerial spraying systems — Part 1: Environmental requirements