GSO EN 12662:2022
Gulf Standard
Current Edition
·
Approved on
12 May 2022
·
Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
GSO EN 12662:2022 Files
No files are available for this standard right now!
You can buy this standard from any member store
GSO EN 12662:2022 Scope
This European Standard specifies a method for the determination of the content of undissolved substances, referred to as total contamination, in middle distillates, in diesel fuels containing up to 30 % (V/V) fatty acid methyl esters (FAME), and in neat FAME. The working range is from 12 mg/kg to 30 mg/kg and it was established in an interlaboratory study by applying EN ISO 4259 [2]. This European Standard in general applies to products having a kinematic viscosity not exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, e.g. diesel fuel as specified in EN 590 [1]. This test method may be used for diesel fuels containing more than 30 % (V/V) FAME and for petroleum products having a kinematic viscosity exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, however in such cases the precision of the test method is not defined. NOTE 1 Excessive contamination in a fuel system can give rise to premature blocking of filters and/or hardware failure, and is therefore undesirable. NOTE 2 For the purposes of this European Standard, the term "% (V/V)" is used to represent the volume fraction, φ, of a material. WARNING - Use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
Best Sellers From Oil and Gas Sector
GSO 1180:2021
Gulf Standard
Automatic transmission fluid (ATF)
GSO 672:2010
Gulf Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).
GSO 1161:2021
Gulf Standard
HLP HYDRAULIC OILS
GSO 477:2011
Gulf Standard
Gulf Guide of Standard Specifications for Diesel(Gas Oil)
Recently Published from Oil and Gas Sector
GSO 1785-1:2024
Gulf Technical Regulation
Lubricating Oils for Internal Combustion Engines – Part 1: API Classifications of Lubricating Oils for Gasoline and Diesel Engines
GSO ISO 15663:2024
ISO 15663:2021
Gulf Standard
Petroleum, petrochemical and natural gas industries — Life cycle costing
GSO ASTM D6377:2024
ASTM D6377:20
Gulf Standard
Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCR<inf>x</inf > (Expansion Method)
GSO ASTM D5133:2024
ASTM D5133:20a
Gulf Standard
Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique