GSO IEC 63136:2024
IEC 63136:2019
Gulf Standard
Current Edition
·
Approved on
31 January 2024
Electric dishwashers for commercial use - Test methods for measuring the performance
GSO IEC 63136:2024 Files
No files are available for this standard right now!
You can buy this standard from any member store
GSO IEC 63136:2024 Scope
IEC 63136:2019 applies to manually loaded under-counter one-tank and one-tank hood-type electrically heated dishwashing machines for washing plates, dishes, glassware, cutlery and similar articles.
These machines are used in commercial kitchens, such as restaurants, canteens, hospitals and in businesses such as bakeries, butchers' shops, etc.
This document does not apply to commercial dishwashers with transport systems (flight-type and rack conveyor dishwashers) and utensil washers.
This document does not apply to undercounter water-change dishwashers.
This document does not apply to appliances designed exclusively for industrial purposes.
The object is to state and define the principal performance characteristics of electric dishwashers for commercial use and to describe the standard methods of measuring these characteristics.
The characteristics are measured by washing plates.
This document is concerned neither with safety nor with minimum performance requirements.
The contents of the corrigendum of March 2021 have been included in this copy.
These machines are used in commercial kitchens, such as restaurants, canteens, hospitals and in businesses such as bakeries, butchers' shops, etc.
This document does not apply to commercial dishwashers with transport systems (flight-type and rack conveyor dishwashers) and utensil washers.
This document does not apply to undercounter water-change dishwashers.
This document does not apply to appliances designed exclusively for industrial purposes.
The object is to state and define the principal performance characteristics of electric dishwashers for commercial use and to describe the standard methods of measuring these characteristics.
The characteristics are measured by washing plates.
This document is concerned neither with safety nor with minimum performance requirements.
The contents of the corrigendum of March 2021 have been included in this copy.
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
GSO 1899:2016
Gulf Standard
GCC Standard voltages and frequencies for AC transmission and distribution systems
Recently Published from Electrical Sector
GSO IEC 61558-2-2:2024
IEC 61558-2-2:2022
Gulf Standard
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transformers
GSO IEC 60664-1:2024
IEC 60664-1:2020
Gulf Standard
Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests
GSO IEC 61936-2:2024
IEC 61936-2:2023
Gulf Standard
Power installations exceeding 1 kV AC and 1,5 kV DC - Part 2: DC
GSO IEC TS 62915:2024
IEC TS 62915:2023
Gulf Standard
Photovoltaic (PV) modules - Type approval, design and safety qualification - Retesting