GSO ASTM D2290:2024
Gulf Standard
Current Edition
·
Approved on
25 April 2024
·
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
GSO ASTM D2290:2024 Files
No files are available for this standard right now!
You can buy this standard from any member store
GSO ASTM D2290:2024 Scope
1.1 This test method covers the determination of the comparative apparent tensile strength of most plastic products
utilizing a split disk or ring segment test fixture, when tested
under defined conditions of pretreatment, temperature,
humidity, and test machine speed. This test method is applicable to reinforced-thermosetting resin pipe regardless of
fabrication method. This test method also is applicable to
extruded and molded thermoplastic pipe.
Procedure A is used for reinforced-thermosetting resin pipe;
Procedure B is used for thermoplastic pipe of any size;
Procedure C is used for thermoplastic pipe with nominal
diameter of 41⁄2 in. (110 mm) and greater. Procedure D is used
for polyethylene pipe with a nominal diameter of 14 in. (350
mm) and greater and preferably having wall thickness 1 in. (25
mm) and greater. Procedure E is used for polyvinyl chloride
(PVC) pipe with a nominal diameter of 14 in. (350 mm) and
greater and having wall thickness 0.5 in. (12.7 mm) and
greater.
1.2 The values stated in inch-pound units are to be regarded
as standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only
and are not considered standard.
1.3 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical
Barriers to Trade (TBT) Committee.
Best Sellers From Chemical and Textile Sector
GSO 575:2016
Gulf Standard
Facial tissue - paper
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2640:2021
Gulf Standard
Cosmetic Products - General Requirements of Soaps
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1046:2021
Gulf Standard
Cosmetic Products - Perfumery Products based on Ethanol
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2055-4:2021
Gulf Standard
Halal Products- Part 4: Requirements for Halal Cosmetics and Personal care
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Chemical and Textile Sector
GSO 2528:2024
Gulf Technical Regulation
Cosmetic products – Technical Regulation of Cosmetic and Personal Care Products Claims
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1943:2024
Gulf Technical Regulation
Cosmetic Products – Safety Requirements of Cosmetics and Personal Care Products
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO ISO 23674:2024
ISO 23674:2022
Gulf Standard
Cosmetics — Analytical methods — Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO ASTM D2290:2024
ASTM D2290:19a
Gulf Standard
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)