GSO EN 196-9:2024
Gulf Standard
Current Edition
·
Approved on
25 April 2024
·
Methods of testing cement - Part 9: Heat of hydration - Semi-adiabatic method
GSO EN 196-9:2024 Files
English
20 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO EN 196-9:2024 Scope
This European Standard describes a method of measuring the heat of hydration of cements by means of semi-adiabatic calorimetry, also known as the Langavant method. The aim of the test is the continuous measurement of the heat of hydration of cement during the first few days. The heat of hydration is expressed in joules per gram of cement.
This standard is applicable to all cements and hydraulic binders, whatever their chemical composition, with the exception of quick-setting cements.
NOTE 1 An alternative procedure, called the solution method, is described in EN 196-8. Either procedure can be used independently.
NOTE 2 It has been demonstrated that the best correlation between the two methods is obtained at 41 h for the semi-adiabatic method (EN 196-9) compared with seven days for the heat of solution method (EN 196-8).
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 440:2007
Gulf Standard
Calcium Silicate bricks
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Construction and Building Sector
GSO ASTM E2129:2024
ASTM E2129:18
Gulf Standard
Standard Practice for Data Collection for Sustainability Assessment of Building Products
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO EN 196-3:2024
EN 196-3:2016
Gulf Standard
Methods of testing cement - Part 3: Determination of setting times and soundness
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO ISO 12241:2024
ISO 12241:2022
Gulf Standard
Thermal insulation for building equipment and industrial installations — Calculation rules
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO EN 772-11:2024
EN 772-11:2011
Gulf Standard
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)