GSO EN 1673:2000+A1:2011
Gulf Standard
Current Edition
·
Approved on
12 October 2011
·
Food processing machinery - Rotary rack ovens - Safety and hygiene requirements
GSO EN 1673:2000+A1:2011 Files
No files are available for this standard right now!
You can buy this standard from any member store
GSO EN 1673:2000+A1:2011 Scope
This standard specifies safety and hygiene requirements for the design and manufacture of rotary rack ovens with one or more rotary racks. These ovens are used in the food industry and shops (bakeries, pastry-making, etc.) for the batch baking of foodstuffs containing flour, water and other additives. This standard applies to ovens used only for food products except for those containing volatile flammable ingredients. The control of the humidity of the air in the baking chamber is by the production and introduction of steam around normal atmospheric pressure. The following machines are excluded: - experimental and testing machines under development by the manufacturer; - domestic appliances. This standard covers the technical safety requirements for the installation, cleaning and maintenance of these machines as defined in 3.12 of EN 292-1:1991 and in the manufacturer's instruction handbook. The significant hazards covered by this standard are mechanical (shearing, trapping, impact, loss of stability), electrical, thermal, ergonomic and those resulting from lack of hygiene. They are specifically listed in 4. Noise is not considered to be a significant hazard from rotary rack ovens. This does not mean that the manufacturer of the machine is absolved from reducing noise and making a noise declaration. Therefore a noise test code is proposed in Annex B. The hazards from the use of gaseous fuel by gas appliances are not covered by this standard. This standard applies only to machines manufactured after the date of issue of the standard.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1780:2010
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Mechanical Sector
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO ISO 21384-2:2024
ISO 21384-2:2021
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO ISO 22407:2024
ISO 22407:2021
Gulf Standard
Metallic materials — Fatigue testing — Axial plane bending method
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO ISO 9093:2024
ISO 9093:2020
Gulf Standard
Small craft — Seacocks and through-hull fittings
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)